AR-1 Carbine Replica
A long-awaited HPA replica by Valken - AR-1. The replica was made of metal and polymer. Key elements such manipulators and pins are made of steel. The receiver of the replica was made of aluminum, it is precisely aligned and the handguard of the replica featuring RIS 22 mm rails was made of durable polymer. What’s important is that the handguard of the replica sits on a MilSpec thread, which allows for the attachment of parts from the live firearm original. The pistol grip also made of polymer is noticeably thinner than in the case of AEG replicas. The replica can be opened in the same way as the live firearm original. It is necessary to remove the two pins holding the receiver halves together.
AR-1, in contrast to previous HPA models from this manufacturer, is powered directly from the tank located in the extendable stock. The replica is ready to fire straight from the transport case (of course, the tank needs to be filled with air and the magazine needs to be loaded with BBs). The replica does not feature any electronic elements - everything is mechanized.
The replica’s tank has a capacity of 13 ci / 3000 PSI and lasts for 500- 600 shots (depending on the PSI level settings).
The set includes a hex key intended for the adjustment of the replica. The Hop-Up adjustment is located on top of the replica, in the RIS rail. The access to the FPS adjustment is possible after the opening of the replica.
The replica comes with polymer, flip-up iron sights as well as polymer Hi-Cap magazine.
All elements are packed in a practical transport case.
The set includes:
- replica with tank
- flip-up iron sights
- hex key for adjustment
- replica caution tape
- transport case
Video by Valken depicting the operation of the replica:
Replika karabinka AR-1 - czarna
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Type of fire:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
Metal + plastic + steel
|Propulsion / Powered by:|
|Barrel thread type:|