V12 Optima BLOCK-II Assault Rifle Replica
A ready-to-use HPA replica by Valken.
The replica was made from high quality materials with the utmost care for details. Parts made from durable polymer include: the receiver, RIS hand guard, iron sights, pistol grip and stock. Remaining external elements were made from metal. The alignment of elements is not a subject of any concern. There is no loose space here even between the upper and lower receivers, which is quite typical and often in other models, even from renowned manufacturers. The replica features a multi-position stock as well as flip-up iron sights attached to a top RIS mounting rail. High precision of shots is possible thanks to 363 mm long barrel and polymer Hop-Up chamber equipped with perfected adjustment system (known, for instance, from M249 replicas).
Replica’s heart is a HP V12 motor. It is a pneumatic-electric hybrid that allows to customize its performance to the needs of the user as much as possible. The motor is fully programmable - the process of configuring parameters is incredibly simple and intuitive thanks to programming on the base of diodes’ colours without having to take out the system from a replica (the set includes a clear manual). What’s more, the motor can be locked on particular settings using installed mechanical lock (popular solution during airsoft events in the USA used in order to prevent players from exceeding the limits set in place for the duration of the event).
The motor can be equipped with 4 different nozzle that modify its maximum muzzle velocity:
<![if !supportLists]>· <![endif]>Black ~ 430 FPS
<![if !supportLists]>· <![endif]>Silver ~470 FPS
<![if !supportLists]>· <![endif]>Gold ~ 490 FPS
<![if !supportLists]>· <![endif]>Red ~ 510 FPS
Included in the set nozzle (black) allows to achieve a maximum of 430 FPS at stock configuration. Maximum settings and 120 PSI pressure as well as 510 mm long barrel results in a muzzle velocity of ~390 FPS using 0.36 g BBs and ~420 FPS 0.30 g BBs (approx. 2.5 joules). It is worth to remember that final results depend on used components of the HP system and the barrel - they can be higher or smaller than provided. Skeleton motor features easily removable, polymer spacer. This allows to rapidly and practically without the need for any tools change the nozzle.
The set includes:
- Hi-Cap magazine
For proper operation of the modification the following are also required:
<![if !supportLists]>· <![endif]>tank
<![if !supportLists]>· <![endif]>II degree 0-120 PSI regulator
<![if !supportLists]>· <![endif]>hose + couplers
<![if !supportLists]>· <![endif]>LiPo 7.4V battery with JST Connector
Aforementioned components are not included in the set.
We also recommend familiarizing yourself with remaining tutorials available on Valken’s YouTube channel.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
|Inner barrel length [mm]:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
|Propulsion / Powered by:|
Replika karabinka V12 Optima BLOCK-II - tan
|Magazine capacity [pcs]:|
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Type of fire:|
Single, auto, 3-shot burst
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Metal + plastic