Replika karabinu elektrycznego ST-19

  • Wykonanie: aluminium + stop cynku i aluminium + tworzywo sztuczne
  • Waga: 3300g
  • Kolor: czarny
  • Pojemność magazynka: 57 kulek
  • Długość: 825-910mm
  • Prędkość wylotowa: ~370 FPS
  • Producent: S&T

Click to zoom

Replika karabinu elektrycznego ST-19
Manufacturer: S&T ARMAMENT
Product code: SIT-01-005209
Very small quantity of stock
Ready to ship in 2days
Cost from £11.06
192.73£ / 1pcs
You save 10% (£21.42).
  • Delicious

     Replika karabinu elektrycznego ST-19
Replika wykonana jest z aluminium, tworzywa sztucznego oraz ZnAlu. Z tworzywa wykonano chwyt pistoletowy, kolbę oraz magazynek. Górna część korpusu wraz z szynami RIS tworzą jedną całość i wykonane są z aluminium obrabianego metodą CNC. Mechaniczne przyrządy celownicze oraz lufę zewnętrzną wykonano ze ZnAlu. Replika zasilana jest  magazynkami do replik typu P90. Zaopatrzona jest w regulowany system Hop-up widoczny po zdjęciu magazynka, umożliwiający zoptymalizowanie toru lotu kulki. Kolba typu SF regulowana jest w czterech stopniach

Zastosowanie 8-milimetrowych łożysk w gearboxie repliki zapewnie lepszą kulturę pracy kół zębatych zwłaszcza przy zastosowanym przez producenta silniku High Torque. Dodatkowo zastosowano w replice tłok z pełnymi, metalowymi zębami oraz metalową prowadnicę sprężyny. 


     W zestawie znajduje się:

- replika ST-19
- magazynek
- akumulator 9,6V NiMH
- ładowarka

Tech specs:
Replika karabinu elektrycznego ST-19
S&T Armament
12 months
Velocity [FPS]:

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

Propulsion / Powered by:
Gearbox version:

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

v2 Gearbox
Type of fire:
Single, auto
Diameter of bearings in GB [mm]:
Made of:
ZnAl + aluminum + plastic
Lenght [mm]:

The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg.  folding stock or extended flash hider).

Inner barrel length [mm]:
Weight [g]:

This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.

Battery Voltage [V]:
Battery Capacity [mAh]:

Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater  capacity, then replica will shoot longer.

Battery included:

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

Magazine type:
Mid-Cap magazine
Magazine capacity [pcs]:

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Yes, adjustable
Blow Back:

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

Repliki pozostałe
Users reviews
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
Recommend this product:

If you want to tell your friend about this product, please use the form below.

This field is required for placing an order.
You can add more e-mail addresses by separating them with a coma
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.