AK Beta carbine replica
The AK Beta carbine replica was made fully of steel, an alloy of zinc and aluminum and plastic. The pistol grip, the fixed stock and the front RIS grip were made of plastic, the replica's total length is 740mm.
The firing mode selection lever is located on the right side of the replica and is marked with graphic symbols of the firing mode. The replica is equipped with the PBB system which perfectly imitates the operation of the original firearm. It makes the bolt carrier move and gives a perceptible "kick" effect.
When you pull the cocking handle, the dust cover is opened and the bolt carrier's dummy moves to the backwards position. This allows to adjust the hop-up.
The replica is made in black color. It is perfect for operating in short and middle distances.
An extraordinary Blow-Back system provides additional realism for the user of the replica and ensures additional experiences for the user himself.
The Pneumatic Blow-Back system operates on the principal of taking a part of the compressed air from the gearbox to a special cylinder that is located above the gearbox’s casing. The small piston that is located in the Pneumatic Blow-Back system moves a thin plate that is attached to it. The plate imitates the bolt carrier.
The G&G replica’s that are equipped with the Pneumatic Blow-Back system have got a reinforced and modified V.3 gearbox. The modification that was made was the adaptation of the gearbox to the Pneumatic Blow-Back system and adding the “active main spring release” button in the form of the actuator.
The set includes:
- the carbine replica,
- a magazine,
Replika karaninka AK Beta
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic + steel
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.