Replika karabinu szturmowego SG550
The replica is made of plastic and steel. The outer barrel is the only metal made element. the flash hider, the RIS rail, the body, the trigger, the trigger guard and the firing mode selector lever are made of steel. The stock is foldable to the right side thanks to what the transport of the replica becomes a lot easier. The stock’s foot is made of rubber. The set includes a real-cap type magazine which holds 30 BB pellets. The application of the longer tappet plate makes that all of the BB pellets are shot. You can see the dummy cases and bullets which are placed in the magazine through the half see-through magazine case.
The battery is located in the front grip. It is possible to take off the front grip and disassemble to replica’s body in two halves upon taking out one pin. An electricity passing plug set was placed in the gearbox instead of the ordinary wiring. The ambidextrous firing mode selection lever makes that the replica may be used by both, left and right handed shooters. The trigger guard is mounted on two screws thanks to what it is possible to place it in different angles in the range of 180 degrees.
The set includes:
- the SG550 rifle replica,
- a magazine holding 30 BB pellets,
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic + steel
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
755 / 1005
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.