JG203 sub-machinegun replica
A very well made and fitted replica of the PDW sub-machinegun. The replica’s body, the outer barrel, the iron aiming sights and the flash-hider are made of metal, while as the stock, the pistol grip and the front grip are made of nylon. The flash-hider and the stock can be easily detached in order to gain an even more compact replica. The stock itself can be folded to the side in order to facilitate the transport and storage.
The small dimensions, the proper balancing and the overall compactness make the JG203 a perfect replica for close-range skirmishes and for the CQB type games. The replica’s features are even greater thanks to the ambidextrous firing mode selection lever which allows for a comfortable and trouble-free change of the firing mode with both, the left and the right hand. What is important, the iron aiming sights are fully adjustable.
The replica is powered by a V.3 gearbox which is equipped with a set of steel thread-wheels. A metal ball bearing spring guide is also used and it significantly facilitates the operation of the mechanism.
The set includes:
- the replica,
- a battery,
- a charger,
- a magazine,
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
400 / 630
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Voltage [V]:|
|Battery Capacity [mAh]:|
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.