CM16 Raider DST carbine replica
The CM16 Raider DST carbine replica made by G&G was made within the Combat Machine Project which goal is to deliver high class replicas in the price which can be considered economical. The Combat Machine replica characterize themselves by the highest, characteristic for the G&G company, quality of make and the operation culture as also the high class of the used materials. The main factor allowing to lower the price is the use of a high class plastic body instead of a metal body. It is also a important fact that the body itself was made of plastic reinforced by fiberglass - just like the front grip, the stock or almost all plastic elements. On the other hand, the outer barrel, the stock’s pipe, the tactical sling attachment points, the magazine casing and most of the minor elements were made of metal.
The replica was made in sand color. The top RIS rail allows to attach any optical aiming sight in the place of the carrying handle. The multi-position stock allows to adjust the replica to the individual preferences of the user.
The front grip was replaced with a RIS rail set, 22mm wide each, allowing to attach a great variety of additional devices or accessories such as: a tactical flashlight, a laser target marker or a tactical grip and so on.
The replica is equipped with a reinforced V.2 Gearbox with 8mm ball bearings.
The set includes:
- the replica,
- the magazine,
- 1000 pieces set of G&G 0.20g BB pellets,
CM16 Carbine DST
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
665 / 760
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.