GF60 machine gun replica
The replica was constructed almost entirely of metal - the only elements produced from high quality plastic are the grips, front and pistol, the butt stock, and the magazine. Its structure is characterized by a considerable strength as well as appreciable weight - over 14 pounds. This is not a gun to run around with. But on the other hand - that's not what it was designed for.
To manufacture this model, strengthened internal components, including metal cylinder head, reinforced heads and chrome-plated cylinder, piston, spring guide as well as equipped with the bearing were used. What we also have here are steel gears, in this case mounted on 8 mm bearings.
The rifle is equipped with low-resistance wiring with MOSFET and, what's interesting - a potentiometer. Placed under the barrel, it allows you to regulate the rate of fire. During the tests, we could obtain any rate of fire from 320 to 630 RPM while using the stock battery. It is worth mentioning that the theoretical ROF of the original weapon was 550 RPM.
What makes our offer different then that sold by our competition? Along with this high-quality replica, we deliver the highest quality cover for the magazine in two camouflages. The material used to produce it is CORDURA 1000D.
Replika karabinu maszynowego GF60
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
Metal + plastic
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.