RK-10 Assault Rifle Replica
An entire array of assault rifle replicas from beyond the eastern border belongs to the RK series by Boyi/Dboys. The use of good quality materials and good fit of their parts allows the replicas to look very solid and are an often choice by airsoft enthusiasts.
10S version was made using almost only steel. The same material was used in manufacture of the receiver, front and rear sight bases, dust cover, stock with the latch and tactical sling swivel, muzzle device, fire mode selector, gas pipe and cleaning rod replicas. The only non-steel element in RK-10S is the aluminum outer barrel. The realism and character of the replica is bolstered by natural wood plywood parts - the cradle and gas pipe cap. Only the pistol grip was made from polymer - exactly as in the live firearm original.
The use of wooden elements and black, mat colour finish gives the replica a very realistic appearance. The stock folds under the receiver, which allows to reduce the size of the replica. Stick type battery is stored under the dust cover (included in the set). The replica can be partially disassembled as its live firearm original. It only lacks the screws, which is a result of a construction based on the VFC standard.
The heart of the replica is a gearbox v.3, which is characteristic for its long lifetime and being an excellent base for potential tuning. Inside the replica is a two-way going piston head; reinforced, bearing-mounted spring slide and 7mm ball bearings.
The replica comes with a hi-cap steel magazine with a capacity of up to 500 BBs.
The set includes:
- tactical sling
- cleaning rod
Replika karabinka RK-10S
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
|Diameter of bearings in GB [mm]:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
665 / 905
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Capacity [mAh]:|
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
Stal + aluminium + drewno + tworzywo sztuczne
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Battery Voltage [V]:|